
LED Strip
RGB + CCT Pixel COB LED Strip 24V
A 10 mm COB strip that combines full color and tunable white from warm to cool, with no visible dots. Addressable: gradients, animated effects and white light that follows your day.
5 m roll
- Continuous light: 840 COB LEDs per metre, no visible dots.
- RGB color and tunable white from 3000K to 6500K on one strip.
- Addressable: every segment lights up in its own color.
- CRI above 90: colors in the room stay true.
- 10 mm wide: fits 12 mm aluminum channels.
- Available in IP20 for indoor use, and soon in IP66 for outdoor use.
The pixel strip
Every segment,
its own color.
An ordinary strip shows one color at a time, along its whole length. A pixel strip is different: a tiny chip every few centimetres drives its own segment of the strip. Each segment, its pixel, has its own color and its own white. That is what makes gradients, waves and effects that run from end to end possible.
Ordinary strip: one color for the whole strip
SKYLED pixel strip: every segment independent
Try an effect
Gradients, not flat color
Several colors at once on the same strip: a sunset, an aurora, a flag.
Motion
Waves, comets, breathing, fireplace: light moves along the strip.
Two true whites
Every pixel has a warm white and a cool white on top of RGB: 5 channels.
Cut to size
A cut point every 71.4 mm: the strip fits the room, each piece keeps its pixels.
Technical data
Full specifications.
| Light | |
|---|---|
| Technology | COB, 840 LEDs/m, continuous line with no dots |
| Colors | RGB + warm white + cool white (RGBCCT) |
| Tunable white | 3000K to 6500K |
| Luminous flux | 500 to 700 lm/m |
| CRI | > 90 |
| Color consistency | SDCM ≤ 3 |
| Electrical | |
| Voltage | 24V DC |
| Power | 23 W/m · 7.01 W/ft |
| Per 5 m roll | 115 W (peak) |
| Max. run powered from one end | 5 m |
| Power supply | 24V non-dimmable, loaded to 80% max. |
| Control | |
| Type | Addressable (pixel), single data line |
| Driver IC | JD36703A, 2 per pixel (one RGB + one warm/cool white) |
| Channels | 5 × 8 bits = 40 bits per pixel |
| Color order | R-G-B-WW-CW |
| Data rate | 800 kHz |
| Pixels | to be confirmed with the manufacturer |
| Backup data line | none |
| Controller | SKYLED WiFi Controller |
| Mechanical | |
| PCB width | 10 mm |
| Thickness | 2.1 mm |
| Cut point | every 71.4 mm |
| Roll length | 5 m |
| Copper | 2 oz |
| Adhesive | 3M 9495LE |
| Min. bend radius | Ø 10 cm (4 in) |
| Channels | fits 12 mm aluminum channels |
| Wiring | |
| Connectors | 3-pin (V+, DI, GND) + 15 cm leads, both ends |
| Power leads | 2 extra wires at one end: red V+, white GND |
| Wire gauge | 22 AWG |
| Environment | |
| Indoor version | IP20 · dry locations |
| Outdoor version | IP66 · width, power and certification: coming soon |
Good to know
- Do not power the strip while it is still coiled on its reel; do not fold, twist or cover it.
- Beyond 5 m, feed power to each roll from the power supply.
- Not compatible with 120V dimmers or remotes for non-addressable strips.
